Tag Archives: project

concho title

oy-2

 

oy vey

booiii

image (3)

Wild Heart Vegan Hobo– Free People | Oh Valencia Caftan-Free People | Metal Cones-Crazy Crow | Buckskin-Similar Here | Concho-Similar Here

▼▼▼▼

Festival season is upon us and I’ve definitely been noticing the influx of new accessory trends. Leather is big, and edgy is taking over the bohemian vibe. Harnesses, Bolo’s, Chained Belts, and of course, fringe. It’s biker chic and I dig it. I was inspired by all of the concho’s and fringe that I’ve been seeing and decided to crate a hybrid purse bolo. Once you have the supplies, this guy takes about 15 minutes to make…tops. It adds jingle and flair to any handbag. Tips for this project: Match your piece of leather as closely to your bag as possible (grain/color). You also must have a bag that had detachable/adjustable straps unless you want to build your bolo around the strap…convertible crossbody’s are perfect for this!

Materials:

Leather of your choice (I used buckskin, you can opt for a vegan leather though)
Metal Cones
Concho Charm
Scissors
Jewelry pliers with smooth finish (no crimps) for clamping cones

Directions:

Smooth out your leather and measure the piece to whatever length you want, making sure the width of the cut will fit when threaded through the concho. Cut the piece making sure you completely close the scissors when cutting, meaning the end of the scissors come together completely (this will prevent the leather from fraying). Once you have your ribbon of leather, fold it in half on itself making sure the ends line up, and thread through the concho. Once you have the concho in place, cut the fringe from the bottom of the ribbon, using the same technique with the scissors. Make sure the fringe is the correct width for insertion in the metal cones, no too thin, not too thick. Once all fringe is cut, thread the cones onto each piece of fringe rolling the leather in between your fingers of one hand, and twisting the cone onto said fringe with your other hand. Thread all cones before crimping, so you can line up the cones evenly. Make sure the edge of the fringe is not sticking out of the bottom of the cone, if so just slightly pull cones down so they are even again. Using the pliers, gently crimp the top of the cone where the leather meets the cone. Do this on all pieces and voila!

Tagged , , , , , , , , , ,

diy 7diy 2diy 4diy 5diy 3
diy 6

▼▼▼▼

I have to admit, a lot of my inspiration comes from the same place…my place of work. Im a part-time employee at Anthropologie, and being in such am artistic environment keeps the creative wheels turning. So, when some antique painted pots arrived in our store I thought, “I can do that at home.” Granted, these are a far cry from the teal and magenta drip-painted pots that ring up at over $700 a piece, they’re my own twist on decorative pottery. Try this super simple DIY, which only requires three materials. Do it out in the front the yard, and you may even make some curious new friends.

Materials:

Terra Cotta Pots (one for each of your plant babies)
Rustoleum “Forged Hammered” Spray Paint
Gorilla Tape

Directions:
Make sure your pots are clean and free of any surface debris. Tape right below the lip of the pot, guiding the tape along and slightly twisting as you go. Turn pot upside down and spray paint according to directions on the can. Make sure you get the top of the lip and slightly inside so no orange shows. Let dry for 2 hours, and plant!

Tagged , , , , , , , , , , , , ,

D.I.Y. Foraged and Recycled Gift Wrap

IMG_8823  IMG_8834 IMG_8825IMG_8835
IMG_8847IMG_8836

▼▼▼▼

Forage: To wander in search of provisions

Recycle: To recondition and adapt to a new use or function

Every year I set out to create a theme for my holiday wrapping. Sadly, the holidays now seem surrounded by so much consumerism and waste, I decided to try and make everything as sustainable as possible this season. We save our cardboard boxes and brown paper bags, so I used those instead of buying gift boxes/bags. I found some great 100% recycled brown wrapping paper from Crate and Barrel, and at $15.95 for a generous 300 feet of paper, knew it would be more than enough for all of our family’s gifts. The rustic wood gift tags are re-purposed scraps from timber processing factories, and are so much more beautiful than those tacky santa stickers. For the moss, we took our dog for a walk in the woods and gathered different shades of green from the trees, stopping to pick up some fallen pine branches that we added to the mix.  Even a small amount of consciousness about what we buy, and try not to buy, helps this beautiful planet that we are lucky to live on.

Tagged , , , , , , , , , , , , , , , , , , , , , , , , ,

DIY: Indoor Succulent Hanger and Terrarium

DSC03653 tumblr_lqrzrtCEKV1qmu1fj DSC03661 tumblr_lqrzyzcFdp1qmu1fj DSC03656 tumblr_lqs001U49G1qmu1fj
▼▼▼▼

An older project that is just too good not to share on Go for the Gusto. I love the idea of indoor plants contributing fresh air and creating a relaxing environment in the home. Now that we are getting into the colder weather (first snow last night in Taos Ski Valley!) and the greenery around us is fading fast, why not create your own foliage filled room. I love my hanging succulents, they add a bit of whimsy to any room, and are completely low maintenance…like water once a week. (p.s. this entire project costs only 30 dollars!)

Materials:

Assorted Succulents (about 8)
Soil (4 cups)
Smooth Gravel (2 cups)
Mason Jars (4)
Shallow Glass Terrarium Bowl
Bailing Wire
Dowel (3/4 inch)
Needle Nose Pliers
Tea Cup Hanging Hooks (3)

Directions:

For the hanger, fashion four loops of bailing wire around the bottom of the lip of a mason jar, using the needle nose pliers to create a secure closure. Measure eight wires to attach to the mason jar loops, attach using the pliers in the same way as the loop closure. Twist and loop each of the eight wires around dowel, so the jars are suspended evenly from the dowel.

Fill both mason jars and bowl with about 1 inch of gravel, then layer 1 inch of soil on top of that. Remove succulents from cups and gently loosen roots. Add one succulent to each jar, and four spaced out in the terrarium. Cover with 1-2 more inches of soil, until succulents are secure. Twist screw part of hook hangers into the ceiling where you would like your hanger to be (make sure they are evenly spaced, one hook to support the middle) facing hook side toward you. Place dowel with succulents onto the hooks and enjoy your new indoor plants!

Tagged , , , , , , , , , , , , , , , ,

DIY: Stud Earring Frame

IMG_7069 IMG_7082 IMG_7087 IMG_7093

IMG_7098 IMG_7105IMG_7100

▼▼▼▼

I’ve never been a dangle-y earring type of girl, usually leave the statement pieces to the stacks on my wrists, and opt for simpler ear studs. I love collecting stud earrings from everywhere I travel and mixing and matching them into funky combinations (see arrowhead stud from 2011’s Grand Canyon road trip). This usually leaves me with a box of unorganized studs and earring backs. In the aftermath of post-moving closet disfunction, came gradual recallibration. I wanted an efficient way to organize the mess, making it easier for me to see and decide on everyday ear adornment. I found some copper screen in the garage, and low and behold we had a staple gun. I sought out a simple wooden frame to tack the screen to. The one that I chose was five dollars (contrary to the usual; pick something and its the most expensive thing in the store, syndrome) so I left feeling accomplished. This project took a total of 15 minutes and has significantly enhanced my morning ear swag routine.

Materials:
Small picture frame of your choice
Screen (I opted for copper)
Staple Gun
Wire cutters

Directions:
Remove glass and backing from frame. Measure and cut screen making sure it’s 1/2 inch from the outside edge of the back of the frame. On the back of the frame, hold screen firmly in place starting in one corner, moving along the edges stapling and stretching the opposite side of the screen as you go. I stapled about every half inch or so. Complete all sides, and organize studs as you please!

Tagged , , , , , , , , ,

DIY: Festival Vest

1vest collage 2sew it 34stud it 5party 6

539868_10101455584633623_336330557_n

▼▼▼▼

So I had been holding on to these two “really cool” shirts that my best friend and I had in high school. I carried them with me through one dorm room, three college houses, one post college house etc. I was determined to use them for something to commemorate our Taos High shenanigans, and the fact that we thought we were hot sh*t. It’s comical really. I had planned on finding some hoodies and sewing parts of the t-shirt onto the hoodie, but came up with a better idea. BESTI FESTI VESTIS. Yes, the name just as “cool” as the said shirts.

1)Pick out your vests (Buffalo Exchange or Forever 21 are good places to find cheap denim) remember that the thinner the fabric, the easer it is to sew
2)Place shirts over vest to determine cut line, cut shirts…carefully, you don’t get a do-over
3)Start sewing the edges of the shirt fabric to the denim (use a thread color that is similar to shirt color)
4)Use different colored embroidery thread, looping it around edges, to accent collar/pockets
5)Use assorted crafting studs on pockets/lapel etc.
6)Party.

Tagged , , , , , , , , ,
%d bloggers like this: